BUILD A TONE MONSTER!

GUITAR FUEL Performance Products


The MAH3 has all the bells & whistles to make your next guitar amplifier build the envy of all of your friends. With a full 3 watts of power, it features (3) levels of overdrive from sweet vintage tube to classic rock and all out metal mayhem! Loaded with our proprietary tone expander circuit which not only provides enhanced EQ control but a flat boost for tones that rival many full size guitar amplifiers. Powered by a 9V battery for complete portability or external power supply (not included), you can power multiple speakers for a classic twin build. Not to be confused with all those pint-sized 1 watt or less replicas of brand names amps collecting dust on your shelf, the MAH3 is a serious little TONE MONSTER!

This is not a "gut a no name mini amp and put it in a cigar box" but a custom designed amplifier circuit that will blow away all of those 1 watt replicas collecting dust on your shelf. Great for low level jamming, practice, busking and even for recording. Best of all it allows you to create a personal statement with your choice of the enclosure. From cigar boxes and vintage radios to custom built enclosures and lunches boxes, we always recommend that you "think outside the box" for a unique build!

MAH3 Features
- 3 watts
- volume
- tone expander
- (3) levels of overdrive Tube/Rock/Metal
- 3.5mm headphone/ear bud output jack
- 1/4" input jack
- 9 to 12VDC input (adapter not included)
- 9V battery clip
- red power LED
- speaker leads
Recommended Speaker
2" to 8" Rated @ 3 to 10 watts 4 or 8 ohm
Recommended Power Supply
9 to 12 VDC 500mA Center (+) Fully Regulated


The MAH3 is designed as a mini amp circuit for use with small (2-6") low wattage (3 up to 10 watt) 4 or 8 ohm speakers. If used with large high wattage guitar, PA, car audio or stereo speakers distorted sound, overheating and permanent damage to the circuit may result! The suggested DC power supply is 9 up to 12V 500mA center (+) fully regulated however battery power (9V or 8 AA 12V) is recommended. Due to the wired components (potentiometers, input/output jacks & LED) for install flexibility hum can be present when a DC power supply is used. All leads are approximately 7"/180mm in length. Potentiometers are 6mm split shaft. Knobs are not included!