TMA-11P ACOUSTIC END PIN PREAMP
NEW VERSION!


The TMA-11P is a professional acoustic preamp system for your 6 or 12 string acoustic guitar! With an extended frequency range for enhanced bass and mids along with a 20% increase in output over similar models, the TMA-11P is our answer for the musician seeking a high quality guitar preamp for both the studio and stage.

Our new flexible film under saddle sensor faithfully reproduces not only the tone of your guitar but the nuances of your playing style. By picking up the subtle vibrations of the top and not just the downward pressure of the strings like an individual element piezo, a much more natural sound is the end result. Slightly less than 1mm thick, it minimizes changes to your guitar's string height and also reduces common string balance issues. Finger pickers (stylists) will enjoy the increased dynamics and punchy tone. Solos will be right out in front of the mix. Strummed chords are full bodied and powerful.


Unlike standard acoustic preamps and the large cut out required in the side of your guitar, the TMA-11P only requires enlargement of the existing strap button hole. This means minimum modification to your cherished instrument and a straight forward installation! Thumb wheel volume & tone controls (STC-1) mount inside your guitar's sound hole with a double-sided adhesive pad. Even our 9V battery pouch uses peel & stick Velcro! And the included cable guides keep everything neat & tidy. Features:

Battery Req. : DC9V
Current : 80microamps at 9V
Active Voltage Range : ~2.5V
Input Jack : 2.5mm
Single Channel Preamp
Clean, crisp sound amplification.
Long battery life (up to 1500 hours w/alkaline battery)
Thumb wheel volume and tone controls
Input Impedance = 1Mohm
Output Impedance = 3Kohm

TMA-22P DUAL CHANNEL PREAMP
BRAND NEW VERSION!


Whether you are a solo artist or play in a group, the TONE MONSTER TMA-22P Dual Channel Preamp is for the discriminating guitarist who seeks a powerful acoustic tone with lots of presence to stand out in the mix. Featuring both a condenser microphone and a new high quality under saddle flexible film sensor, you blend the two signals via independent volume controls. And unlike standard acoustic preamps which typically require a large cut out in the side of your instrument, installation of the TMA-22P requires minimal modification.

Our new under saddle flexible film sensor compliments the condenser microphone by picking up the subtle vibrations of the guitar’s top and not just the downward compression by the strings like an individual element piezo pickup. Slightly less than 1mm thick, it minimizes changes to the guitar’s string height or modification of the saddle. It also reduces common string balance issues and provides a more natural sound.

The STC-3 thumb wheel control unit mounts inside the guitar’s sound hole using an adhesive pad. Controls include microphone volume, sensor volume and sensor tone. Other TMA-22P features include a condenser microphone with a foam windscreen, 9V battery pouch and cable guides to keep everything tidy and in place. Our new under saddle flexible film sensor is also available with our TMA-11P Acoustic End Pin Preamp.

Battery Required: DC9V Alkaline
Current: 80 microamps at 9V
Average Current: 0.8 ma
Active Voltage Range: 4.5V~16V
Frequency Range: 10-30000 Hz
Input Impedance = 1Mohm
Output Impedance = 1Kohm
Battery life - up to 1000 hours with an alkaline battery
Thumb wheel volume (sensor/microphone) and tone (sensor)
Input Jack: 2.5mm condenser microphone
Output Jack: standard ¼”/6.35mm