MAH5 Amplifier Harness



     

We took almost a year to take the MAH-5 from design to production. It is not just an upgraded MAH-3 circuit but a completely new design. To increase output, add functionality and keep the circuit board as small as possible, it required several prototypes to get it just right. The final result is a NO SOLDER solution that allows you to build an awesome mini amp in an hour or so with minimal tools required.

 
  Great for building a mini amp head, stack or a Pocket Monster!

Install in a cigar box or other suitable enclosure for a rockin' mini combo amp. Use as a "head" to power various speaker enclosures. Use a project box to create a POCKET MONSTER! The MAH-5 takes the custom mini amp to the next level. You can build a personal statement that is functional and portable. Whether building an amp for yourself or for resale, the MAH-5 will set your build apart from the rest!

    
Example of a completed amp - enclosure, speaker and hardware not included!

With a full 5 watts of power, you have a choice of tones from crystal clean to metal mayhem. The tone expander circuit provides a flat boost with EQ control making the MAH-5 a real TONE MONSTER! We added an IPOD/MP3 input (3.5mm jack) so you can play along with your favorite music and even an "A" tuning note so you have one less thing to carry with you. As with all of our mini amp harnesses, a 3.5mm headphone/ear bud jack is included and turns off the speaker when in use. Complete portability with a 9V alkaline battery or use a 9-12VDC 500mA center (+) fully regulated power supply. The MAH-5 is simply the most full-featured NO SOLDER guitar amplifier harness on the market today!



FEATURES:

5 watts

Volume~On/Off

5 Way Rotary Switch

Clean, Tube, Blues, Rock, Metal & "A" Tuning Note

Tone Expander

MP3/IPOD Input

9-12VDC Power Input

3.5mm Headphone/Ear Bud Output Jack

9V Battery Clip ~ Red Power LED

All leads are approximately 180mm/7" in length

Recommended Speaker - 4 or 8 ohm rated @ 5 up to 15 watts

External Power Supply Specs: 9-12VDC 500mA Center (+) Fully Regulated

    
MAH5 Harness
only $44.99


   
MAH5 GUITAR Amplifier Kit
only $54.99
Includes:
MAH5 NO SOLDER Harness

3.5" 8 ohm 5 watt speaker
speaker grill cloth* ~ screws/washers/nuts (4)
knobs (3)* ~ 9V battery holder ~ LED holder
diagram & instructions

* style/color may vary based on availability


 


    
Example of a completed amp - enclosure, metal speaker grills and control plate are not included!

MAH5 TWIN guitar Amplifier Kit
only $59.99
Includes:
MAH5 NO SOLDER Harness

  (2) 3.5" 8 ohm 5 watt speakers
speaker grill cloth* ~ screws/washers/nuts (8)
knobs (3)** ~ 9V battery holder ~ LED holder
diagram & instructions

Speaker connection requires soldering!
Connection wire and a diagram are included.

* style/color may vary based on availability



   
 Example of a completed amp - enclosure, covering and hardware not included!

MAH5 QUAD GUITAR Amplifier Kit
only $69.99
Includes:
MAH5 NO SOLDER Harness

  (4) 2.5" 8 ohm 5 watt speakers
speaker grill cloth* ~ screws/washers/nuts (16)
knobs (3)* ~ 9V battery holder ~ LED holder
diagram & instructions


Speaker connection requires soldering!
Connection wire and a diagram are included.

** style/color may vary based on availability

Website Builder